Mechanical Model – Cash Register

UGEARS models are a unique combination of wood and mechanics. UGEARS feature easy-to-assemble wooden pieces and gears that actually move that will bring delight to novice and experienced modelers alike. Made with laser-cut high quality plywood, there is no glue required to assemble these intricate masterpieces. Detailed step-by-step color instructions are provided in 10 languages.

This original and clever mechanical bank is designed as a vintage cash register to keep your finances safe. Just like its real life prototype, the model has coin and notes boxes. For extra-protection, they are secured with a code lock. You can update your code however you like using the code mechanism.

Your cash bank accepts coins from 10 to 35 mm diameter – which covers most of the coin sizes circulating in the world. To keep track of your finances the Cash Register is equipped with a counter and an automatic coin detector. The operation modes switch depending on whether there is a coin in a coin slot or not. If you need to put a coin in the cashbox, put it in a special slot, lift and lower the lever. Duly registered by the counter, the coin will disappear inside the box. When it comes to storing notes, your Cash Register provides an automatic bill acceptor. In order to initiate the mechanism, wind up the rubber-band motor by pulling the lever up and down ten times. This will be enough for the Cash Register to pull in 3-4 notes you put into the note slot.

If you need to access your savings, enter the secret code to unlock the Register and turn the key until the cashbox comes out. This will also reset the counter.

Pieces: 405
Ages: 14+ (Adults)
Finished model size: Approx. 24.5 cm x 15.3 cm x 17.8 cm/ 9.6 in x 6.0 in x 7.0 in
Self-assembly. No glue required! (Approximate assembly time: 8-9 hours)